3″ 75mm Felt glass polishing pad kit

This DIY kit is an excellent cost effective solution for repairs to car glass, windscreens and all other glass products. Kit contains enough consumables for more than one repair.

Best quality High resistant Rayon fiber ensures high gloss finish on various surfaces such as Minerals, Plastics, glass and coatings.

Resin impregnated to one side to give faster cutting action and quality finish.

Bonded fibres ensure no loose particals to contaminate your surface.

hook and loop backing pad, cerium oxide powder, glass polishing compound and pads are ideal for final finishing as well as removing minor scratches and scuffs from any glass surface.

How to use this with a polishing kit:

Mix some Cerium oxide powder into water to a form a thin paste like slurry eg. milk-like consistency, in a small spray bottle which can be used to apply to your polishing pad

Clean the glass surface removing all dirt, grease and residue

Apply the polishing compound mixture to the polishing pad or glass surface

Make sure to mark the inside of the glass with the crayon to identify the area you are working on

With the mounted pad in the drill begin working the area required.

Move the pad up and down, left and right in even movements on the work area.

Keep the surface cool and wet to prevent the glass getting too hot. (Very Important!!)

Inspect the work area by wiping off the residue and keep working until the area is satisfactorily polished

Use the Glass polishing compound on a new or cleaned pad for the final high quality finished polish.

On completion wash and store your polishing pads to use again on your next project.

Weight

320 g

Dimensions